Provide a complete drainage solution for rainy season emergency and disaster relief, quickly and massively drain water, solve emergency drainage and water supply in urban mines and farmlands, and truly achieve stability and accuracy! Instructions for use of series of thick and short mining submersible pumps
Overview
With the continuous excavation and mining of mineral resources, resources above meters have been basically exhausted, so it is inevitable to encounter aquifers during the mining process Drainage equipment is indispensable. Most of the submersible pumps sold on the market now are series of well submersible pumps. This product was originally designed in the 1990s and was mainly pumped from narrow well holes. Water is used for farmland irrigation, so the lift is not too high. However, the mineral resources at that time were not too deep. It is different now. Most of the resources have reached between meters, so the traditional series of deep well submersible pumps are no longer able to do anything.
Under this market background, our company has developed a series of mining submersible pumps. This series of products is a new product independently developed by our company and has applied for national patents. This product has a clear distinction for a series of water pumps.
Stubby appearance
Automatically balances axial force
Adopts embedded couplings to transmit power, making it easy to separate and connect the machine and pump.
Equipped with a high-pressure fully-sealed check valve.
Can be installed at any angle such as horizontal tilt.
There are two suction methods: middle suction and downward suction, which can pump away high water.
+ Applicable occasions: This product is suitable for drainage of accumulated water during mine rock drilling, normal drainage during mine mining, or emergency rescue, mine complex drainage, tunnel drainage and rescue, etc.
Product Features
It is not afraid of flooding in the mine. It can work normally during normal mining or when encountering a sudden surge of water. This equipment is multi-purpose and can be used as a backup pump, normal drainage pump, maintenance pump, emergency pump, etc. The ability to prevent and control floods is far superior to that of horizontal centrifugal pumps. It is especially suitable for use in mining areas with large water level differences and the threat of flooding. The comprehensive investment in equipment is small and cost-effective.
The interior of the safe and explosion-proof motor is filled with clean water,
Suitable for diving underwater and working with high efficiency and energy saving
Low noise, smooth and reliable operation
Various materials, ordinary cast iron, ductile iron, stainless steel, etc. are suitable for Different media.
The driving motor is water-immersed, which is non-polluting and harmless to the environment.
Structure Description of Thick and Short Mining Submersible Pumps
The medium-suction product consists of a pump body and a submersible motor. The pump body is located above the motor, the suction port is in the middle, the discharge port is at the top, and the discharge port is located at the top. There is a fully sealed check valve, which is designed to prevent excessive wear and shortened service life caused by reverse rotation during shutdown.
The downdraft product consists of two parts, namely the suction pump and booster pump part. The water inlet is located at the bottom of the water pump. The suction pump is responsible for absorbing water, and the booster pump is located above for pressurization. This design not only satisfies the two purposes of downdraft and high lift.
Performance range of stubby mining submersible pump
Lift from meter to meter,
Flow rate from
Performance range of small flow and high lift mining submersible pump
Lift from meter to meters,
Flow rate from
Water pump outer diameter
Pump selection
Determine the material of the pump according to the medium being transported and the working environment conditions. If the medium being transported is clean water or solid For mine water and other similar liquids with a particle content no larger than 1 meter and a diameter smaller than 1 meter, the temperature of the liquid pumped by conventional products is no greater than 1 meter. If it exceeds the above, please inform the manufacturer and we can change the temperature resistance level of the motor winding wire. The maximum temperature resistance can be reached within. It is recommended to choose ordinary cast iron for ordinary non-corrosive clean water, choose ductile iron for containing particulate matter, and choose stainless steel for corrosive media.
Mining submersible pump thick and short mining submersible pump Tianjin Zhonglan Pump Industry specializes in R&D and manufacturing
Tianjin Zhonglan Pump Industry Co., Ltd.
Mining submersible pump